Back to IOHK Home Page Back to Data Sheets Index

DS012 - Connect to IOHK using MacTCP / PPP 

To run your PPP connection in Mac, you must have your MacTCP/PPP 
installed and configured.

Configuring MacTCP
1.) In the "Control Panel", open "MacTCP"
2.) Select "PPP" icon, then click on "More" button
    
3.) Enter the information as follows:-
    
    Obtain Address: Server
    Gateway Address: 202.21.128.88
    Class: C
    Subnet Mask: 255.255.255.0
    Domain: iohk.com
    IP Address: 202.21.128.81
    Default: selected

Configuring MacPPP
1.) In the "Control Panel", open "ConfigPPP"
2.) Enter information as follows:-
    
    Port Name: Modem Port
    Idle Timeout: None
    Echo Interval: Off
    Hangup on Close: checked
    Quiet Mode: checked
3.) Click on "Config" button and enter information as follows:-
    
    PPP Server Name: iohk.com
    Port Speed: 57600 (for 14.4K modem, enter 38400 instead)
    Flow Control: None
    Tone Dial: selected
    Phone num: 30018200
    Modem Init: ATZ (if the modem is not running properly, 
                     try AT&F or refer to your modem manual)
    Modem connect timeout: 90
4.) Click on "Authentication"
    Auth. ID: <enter your login id here>
    Password: <enter your password here>
    Click on "OK" then "Done"

Making your PPP Connection
1.) In the "Control Panel", open "ConfigPPP"
2.) Click on "Open" button to connect to IOHK.